High quality spiral wound paper tubes for kits using the BT-60 body tube.

1 ea

Begin an exciting new hobby with Luna Bug Model Rocket Kit. This kit provides the thrill of building and flying your own rocket. With a soaring range up to eight hundred feet and easy to understand instructions, the fun is only one build away from blasting off!

Details:

• Length: 3 11/16"
• Diameter: 6/16"
• Skill Level: Intermediate
• Projected Altitude: 800'

Required (Not Included):

• Engines (A3-4T, 1/4A3-3T, 1/2A3-2T, 1/2A3-4T, Or A10-3T)
• Starters
• Recovery Wadding
• Launch System

Estes Interceptor Kit Expert EST1250

Uses B4-2, B6-4, C6-5

• Contains four different size lugs in one convenient pack
• Used on 1/8 inch, 3/16 inch, and 1/4 inch launch rods
• Contains a total of 16 lugs in 4 different sizes

Overview

New to the Red Max family, this 3 inch diameter version will deliver the long slow lift-offs that Red Max is famous for. Imagine 3.5 seconds of smoke and fury on an Estes F15-4! And Big Red is not just fun on the flying field, he’s fun to build too. Thru-the-wall fins make assembly and alignment easy while giving this rocket extra strength so you can fly it over and over. And only Red Max rockets come with their own special printed Skull & Bones 18 inch parachute.

Almost 27 inches tall and powered by E and F engines, this 1:12 Scale Model is an impressive Sport and Scale model of the sounding rocket manufactured from Lacrosse rocket motors for the project Hardtack Nuclear Test Series.

During the mid-1950s, the public concerns over nuclear fallout due to US and Russian testing was reaching a fevered pitch. To that end, President Eisenhower announced on August 22, 1958, that the US would ban further nuclear testing on or before October 31 of the same year. US scientists, wanting to gather as much data as possible, responded with the "Hardtack" series of tests. Scientists were interested in many scientific areas, but primary interest lay in the effects of radioactivity from underwater and above ground detonation.

The Hardtack Nuclear Testing Program consisted of 35 detonations in the Pacific Proving Grounds during the period of April through August of 1958. Scientists at the time were chiefly concerned about damage to the ozone layer and possible effects of long-range radioactive fallout. They determined that scientific measurements of the earth's upper atmosphere (aeronomy) would help clarify what, if any, damage had occurred.

Single and two-stage Doorknob rockets were developed using Lacrosse and Thiokol solid propellent motors. The instrument-laden sounding rocket could be launched to approximately 50 miles in altitude to capture radioactive data for analysis. Early results of the upper atmosphere data measured little to no damage of the ozone layer during the nuclear testing. It was determined that water detonations probably produced enough ozone to replace what little might have been lost due to above-ground testing.

The single-stage Estes 1:12 scale and sport model of the Doorknob is big and impressive. Simple to build and fun to fly, this kit includes a second set of decals for those who want to turn this scale model into a spectacular sports model.

• Diameter (in): 3.0000
• Length (in): 26.9000
• Manufacturer: Estes
• Recommended Motors: D12‑3, E16‑4, F15‑4, F15‑6
• Recovery: Parachute
• Style: Scale
• Weight (oz): 10.0000

The D.O.R.M. 18 is the perfect launchpad for aspiring rocketeers! This easy-to-assemble, beginner-friendly model ignites a passion for science and flight in young minds (ages 10+). With its impressive performance reaching 1,000 ft. and a safe, reliable parachute recovery system, it delivers a thrilling experience for rocketeers of all ages. Everything you need to launch comes in the box - just add engines (sold separately) and you're ready for liftoff. The D.O.R.M. 18's durable construction is built to withstand multiple launches, so you can experience the thrill of rocketry again and again.

• Up to 1000 ft. projected max altitude
• Bright 12" Parachute recovery
• Launch pad and rod included

• Skill Level: Beginner
• Length: 20.27 in. (51.5 cm)
• Diameter: 0.98 in. (25 mm)
• Estimated Weight: 1.85 oz. (52.4 g)
• Recovery: Parachute
• Projected Max Altitude: 1000 ft. (305 m) on C6-5
• Recommended Engines: A8-3, B6-4, C6-5

In The Box

• (1) Super Mars Snooper (Expert)

Needed to Complete

• WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, fine sandpaper, wax paper, sand block, yellow glue, medium CA glue, hobby knife, masking tape, primer (white), paint (black, blue, white) and clear coat (optional). (Tools, construction and finishing supplies not included.)
• WHAT YOU NEED TO LAUNCH (sold separately): Porta-Pad II Launch Pad and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).

Engines and Starters/Igniters will be shipped USPS Ground

3 – E12-6 Engines
4 – Starters
4 – Plugs

A classic Estes kit re-imagined.

The specially designed engine mount has two molded tabs that hold the wing elevators in the flat position during boost for nice straight-up flights. Then at apogee, the ejection charge kicks the engine mount out and “snap”, the two elevators move into the full “up” position and TAZZ spins like crazy on the way down!

Slightly larger than the original “Gyroc” kit Estes produced in the 1960’s, this updated model features laser cut balsa wings with alignment tabs that fit into pre-cut slots in the body tube. This makes aligning the wings much easier during assembly and after the glue is dry, you also get a strong wing-to-tube glue joint.

The clever molded plastic retainers make installing and replacing the elevator actuator rubber bands very easy.

You can’t count the number of spins this rocket will make on the way down, but you can count on it for lots of fun flights!

WHAT YOU NEED TO BUILD: Scissors, pencil, ruler, yellow glue, plastic cement, hobby knife, masking tape, primer (white), paint (black, white), and clear coat (optional). (Tools, construction and finishing supplies not included.)

WHAT YOU NEED TO LAUNCH (sold separately): Estes Porta-Pad II Launch Pad and Electron Beam Launch Controller, Estes model rocket engines, starters and recovery wadding. Four 1.5V high quality AA alkaline batteries are also required for launch controller (not included).