Repair or customize your RC car or truck! We carry parts for most big-name RC manufacturers including some discontinued, hard-to-find parts to keep your older vehicles in tip-top shape.
If you are a hobbyist that enjoys R/C vehicles or an all out R/C racer or anywhere in between, this tool is a must for your toolbox! Our toe-in gauge allows you to do trackside checks of the toe angles without removing the wheels! Our gauge checks toe through the simple method of comparing the width of the wheels at the rear of the tire to the width of the wheels at the front of the tire! Our gauge is accurate to within one half of a degree per side and closer! This tool can also be used to check legal width of off-road buggies and trucks. The gauge comes with a second thumbscrew hole to check narrower vehicles such as sedans as well.
RPM
Monster Camber Gauge
70950
Regular price
$11.95
Save $-11.95
Key Features
Taller design and large capacity for monster truck owners
Accuracy within 1/2 of a degree
Measures up to 10 degrees
Overview
The new Monster Camber Gauge from RPM offers monster truck owners the chance to perfectly tune their handling and performance. It’s capable of measuring the camber angle on tires up to 6.5 inches or taller and as small as 2 inches in diameter. And it can measure angles up to 10 degrees positive and negative.
Proline
Jeep Gladiator Rubicon 12.3" WB Crawler Body
3535-00
Regular price
$57.49
Save $-57.49
Traxxas
Portal drive output gear, front or rear
TRA8258
Regular price
$5.00
Save $-5.00
RRP
Steel Alloy Pinions - .6 Module
RRP1116
Regular price
$4.45
Save $-4.45
Steel alloy pinions are not heat treated and should only be used with plastic spur gears. Most commonly used on Kyosho and Tamiya electric cars and trucks. In sizes 12 through 24 teeth. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (NOT INCLUDED) fits the 5/40 set screw. .6 module Steel Alloy Pinions are not marked with tooth number.
Description
Bore/Pitch
Teeth
Steel Alloy Motor Pinion Gear
1/8" / .6 Mod
16T
Redcat
Plastic Rear Lower Suspension Arm (2pcs) For Volcano
08006
Regular price
$8.49
Save $-8.49
Catalog Number: RER00325
Plastic Rear Lower Suspension Arm (2pcs)
Fits all: Tsunami and Volcano EPX models
Traxxas
Suspension arms (lower) (2) (fits all Maxx® series)
TRA5132R
Regular price
$7.50
Save $-7.50
RRP
Nickel Plated steel pinion 25T 48P 1/8th bore.
RRP1025
Regular price
$5.27
Save $-5.27
Overview
The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.
Specifications
Gear Pitch
48-Pitch
Gear Type
Pinion
Material
Metal
Tooth Count
25 Tooth
RRP
48P pinion 29T
RRP1029
Regular price
$5.27
Save $-5.27
Overview
The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.
Specifications
Gear Pitch
48-Pitch
Gear Type
Pinion
Material
Metal
Tooth Count
29 Tooth
RRP
48P pinion 27T
RRP1027
Regular price
$5.27
Save $-5.27
The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.
Specifications
Gear Pitch
48-Pitch
Gear Type
Pinion
Material
Metal
Tooth Count
27 Tooth
RRP
18T 48P standard Steel Pinion
RRP1018
Regular price
$5.27
Save $-5.27
Overview
The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.
Specifications
Gear Pitch
48-Pitch
Gear Type
Pinion
Material
Metal
Tooth Count
18 Tooth
RRP
48P pinion 15T
RRP1015
Regular price
$4.65
Save $-4.65
Overview
The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears that last and last when used with a plastic spur gear. Pinions are stamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.
Specifications
Gear Pitch
48-Pitch
Gear Type
Pinion
Material
Metal
Tooth Count
15 Tooth
RRP
32P pinion 22T
RRP0220
Regular price
$4.45
Save $-4.45
Overview
32 pitch alloy pinions are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears these pinions are the perfect choice. 32 pitch Alloy Pinionsare notstamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.
Specifications
Gear Pitch
32-Pitch
Gear Type
Pinion
Material
Metal
Tooth Count
22 Tooth
RRP
32P pinion 21T
RRP0210
Regular price
$4.45
Save $-4.45
Overview
32 pitch alloy pinions are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears these pinions are the perfect choice. 32 pitch Alloy Pinionsare notstamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.
Specifications
Gear Pitch
32-Pitch
Gear Type
Pinion
Material
Metal
Tooth Count
21 Tooth
RRP
32 P Pinion 201
RRP0200
Regular price
$4.45
Save $-4.45
Overview
32 pitch alloy pinions are not heat treated and should only be used with plastic spur gears. If you only run plastic spur gears these pinions are the perfect choice. 32 pitch Alloy Pinionsare notstamped with tooth number. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.
Specifications
Gear Pitch
32-Pitch
Gear Type
Pinion
Material
Metal
Tooth Count
20 Tooth
Traxxas
Push rod (aluminum) (assembled with rod ends) (2) (red)
